Contact: Mr. Sam Liang
Tel.: +86-757-23618838 28301820
Water vapor cooling cutting
CNC flame cutting machines will be slowly taken place by the steam cooling cutting machine, water vapor cooling cutting will be a cutting way that radiate the too hot steam to reach the cutting zone to the cooling and smooth. The seminar marked that water steam cooling cutting can reduce cutting force and the roughness value of workpiece appearance and significantly reduce the cutting temperature, the generated chips are in the more reasonable rules, and the smoothness is improved. Water vapor is at a low price and has no pollution, so it is a good green smooth agent. Currently, the technology is still in the workshop phase.
Low-temperature air-cooled cutting
The low-temperature air-cooled cutting system mainly consists of the cold air installation and cutting system. Low-temperature air-cooled cutting can significantly reduce the temperature of the cutting zone, promote the wear resistance of the tool to extend the life of the tool and improve the quality of processing appearance, and does no pollution to the environment.
The dry cutting
Dry cutting refers to a green cutting way that does not use any cutting fluid to fit ecological request in the cutting machines process. Its advantages: brings no pollution to air and water environments; there is no residue on the chip and reduces clean disposal of capital; it does no harm to human and will not damage the skin or the formation of allergies.
Minimum amount of smooth cutting
The minimum amount of smooth cutting refers to mix the tightening air with a very small amount of the smooth liquid with vaporization to radiate to processing zone to stop the effective smooth. It can greatly reduce the amount of cutting fluid, which can effectively reduce the friction between the tool and the workpiece, the tool and chips, to avoid bonding to extend tool life and the quality of the appearance and the progress of processing. Currently, the technology is mainly used for cast iron, steel and aluminum alloy drilling, reaming, tapping, deep hole drilling, aluminum alloy end face milling.
Gas jet cooling cutting
Gas jet cooling cutting is the cutting processing method based on a certain pressure of the jet gas scouring processing zone in order to obtain the cooling effect. Gas jet cooling cutting has good advantages in the cooling effect, the quality of workpiece and tool use life.
www.aluminum-machine.com is an integrative enterprise of R&D, production and management. It is a director unit of China Building Metals Construction Association of Ministry of Construction and became the profession standard drafter of national aluminum processing in June,1998. Furthermore, its product have gained the honor of "Chinese Famous Product".
We are here to help you! If you close the chatbox, you will automatically receive a response from us via email. Please be sure to leave your contact details so that we can better assist