If you don’t know the maintenance tips of the corner machine, you will lose!

by:kingtool aluminium machinery     2021-08-25
Some friends may not have heard of the corner assembly machine, but aluminum alloy doors and windows are basically used by every household. The correct maintenance techniques can not only extend the service life of the corner assembly machine, but also improve work efficiency in production. Let's take a look together. The transmission part of the angle forming machine needs to be added with lubricating oil frequently to ensure that the amount of lubricating oil is sufficient to avoid jams and affect the angle forming effect of the angle forming machine. The liquid level of the oil tank is kept on the center line of the oil mark to prevent the oil pump from sucking. When used frequently, the fuel tank is generally cleaned once every two months, the oil filter is cleaned once every six months, and the new oil is replaced at the same time. When the oil temperature is too high, it is necessary to take cooling measures or stop the pump, and work normally only after the oil is sufficiently cooled. When the oil temperature is too low, direct work is not allowed, and heating measures are required. The oil temperature can be increased by external heating or low-pressure operation. The tool plane of the angle forming machine should be parallel to the working table of the angle forming machine, and it is necessary to ensure that the tool surface and the working table are clean and tidy at all times to prevent tool corrosion and no impurities in the forming angle. Long-term use of high-pressure hose, due to the aging of the hose, damage at various points will cause the pressure strength of the hose to decrease, so regular inspections should be paid attention to. Long-term use of high-pressure hose, due to the aging of the hose, damage at various points will cause the pressure strength of the hose to decrease, so regular inspections should be paid attention to. When using the angle forming unit, the protective film near the 45° end face of the profile should be torn off, and the end face of the profile should be cleaned. When forming the angle, no protective film should be attached to it, so as not to affect the accuracy of the forming angle. When the corner forming machine is not in use, the power should be turned off, and the work surface and the sanitation around the equipment should be cleaned, so that the corner forming aluminium machine is in a clean and tidy environment. The corner forming aluminium machine should be inspected and maintained from time to time to eliminate potential accidents. The above is the maintenance tips of the corner aluminium machine. Have you learned it?
As we have known for quite some time, the success of kingtool aluminium machinery in the future will depend greatly on our ability to strike a balance between valuable human insight and interaction with technology.
The 21st century is sure to bring more innovation, new services and newer technology, thus new products and services to sell. Kingtool Aluminum Doors and Windows Machinery Co., Ltd. will continue to shape and lead the markets in which it chooses to compete.
Among improvements to panel saw, nearly half of consumers considered quality and service as the most important change a business could make in its supply chain.
For optimal what's cnc machine, choose a high-quality cnc router manufacturers system and make sure a certified installer sets it up.
With wide range of [分类关键词] products of top quality in offer, Kingtool Aluminum Doors and Windows Machinery Co., Ltd. will definitely be your best option for copy milling machine solution. Do feel free to contact us at Kingtool Aluminium Machinery.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...