How to do daily maintenance of broken bridge aluminum door and window equipment

by:kingtool aluminium machinery     2021-10-01
To do the daily maintenance of the broken bridge aluminum door and window equipment, it is necessary to do a series of tasks such as mechanical parts and fasteners, machine tool cleaning, inspection of shower equipment, adding coolant, etc., in this article, Machinery Co., Ltd. Provide you with details about the daily maintenance of broken bridge aluminum doors and windows equipment (including plastic steel doors and windows equipment). Check mechanical parts and fasteners to prevent loosening. All conveying parts should be lubricated regularly, and the guide rail of the movable head should be lubricated regularly every week. Keep a certain amount of oil in the oil cup, change the circulating water in the water tank every day, clean the water tank regularly every week, check the nozzles regularly, and clear the plugs in time. The working surface and jaws, upper and lower jaws of the table-mounted machine should be kept clean and oil-free, and scrubbed every shift. When not in use, clean the machine tool first, and then complete the anti-rust work of moving parts such as circular guide rails. The electric control box should be kept clean, cleaned frequently, and dried with an air gun. Regularly overhaul the on-site power supply system of the equipment, and check the phase and neutral relationship of the power supply system. Check the high-pressure hose regularly. Long-term use of high-pressure hose will cause aging and damage everywhere, and the compressive strength of the hose will decrease. The air source processor needs to be cleaned regularly, and the pressure gauge needs to be properly adjusted. The storage environment of the machine should be kept dry and free of damp and corrosive gases to avoid damage to the machine. Always check whether the shower equipment needs to add coolant, check the mechanical screws and fasteners, to prevent loosening and affect the use, especially the travel switch behind the two ends. Keep the machine clean. After the work of each shift, the chips should be cleaned up in time, and the dust on the surface of the guide rail and the machine should be wiped. Lubricating oil should be applied to the exposed surface of the disc guide rail and evenly applied. Equipment that has not been used for a long time should be cleaned and maintained accordingly, and a protective cover can be appropriately covered. Regular maintenance of the aluminium processing machine for broken aluminum doors and windows can not only reduce hidden dangers, but also extend the service life and improve the efficiency of the equipment. In fact, this is of great significance. If you have a need for equipment for broken bridge aluminum doors and windows, you can contact to provide you with corresponding solutions. We are experienced and have multiple offices across the country to bring you Very good solution. 117
In the past few decades, machining aluminum  production has increased because of the use of aluminum cutting machine.
If you are interested in any of double head cutting machine, please feel free to contact us.
kingtool aluminium machinery is designed to enhance your savings in terms of cost, energy and efforts.If you are interested in our acp cutting machine metal punching machine  products, please contact us soon.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...